Posts Tagged ‘Furnace’

Home Inspectors Recommend Regular HVAC Cleaning

 

PICT0008

Dirty Furnace

It’s getting cold and you are starting to close up the house for the season.  Contaminants that are in your furnace, home, and duct work will circulate through out your home all winter long.  Your HVAC (Heating, Ventilating, Air Conditioning) system can collect molds, fungi, dust, bacteria’s, pollens, and other allergens, that can cause irritation to some or all who live in your home.  Believe it or not, the air in your home can be 2-5 times more polluted that the outdoor air according to the EPA.

Having complete inspections, cleaning and tune up done on your HVAC system can help to clean up the air in your home.  Your system will run more efficiently, and in the end save you money on your yearly heating and cooling bills. A clean HVAC system also helps to increase air flow in your home, resulting in added comfort to you and your family.  

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com


Home Inspectors discussion on Carbon Monoxide Detector Placement

hh_det_prev_carbon_mono

Carbon Monoxide Detector

I see a lot of homes in the process of performing home inspections that do not have Carbon Monoxide (CO) detectors installed.  In some cases  I find that they are not installed properly.  If you are installing only one carbon monoxide detector in your home, the Consumer Product Safety Commission (CPSC) recommends it be located near the sleeping area, where it can wake you if you are asleep.  Additional detectors should be located on every level and within 10 feet of every bedroom of a home to provide extra protection against carbon monoxide poisoning.

It should be noted that carbon monoxide detectors not be located directly above or beside fuel-burning appliances, as appliances may emit a small amount of carbon monoxide upon start-up. Also make sure that detectors are not placed within fifteen feet of heating or cooking appliances or in or near very humid areas such as bathrooms.

I often get asked whether it is better to place a carbon monoxide detector at the ceiling or use the type that plugs into an outlet.  Carbon monoxide is roughly the same weight as air so it can and may be contained in warm air coming from combustion appliances such as home heating equipment. If this is the case, carbon monoxide will rise with the warmer air.  Carbon monoxide is produced from incomplete combustion of fossil fuels. In the home CO can be formed, for example, by open flames, space heaters, water heaters, blocked chimneys or running a car inside a garage.

Since CO is colorless, tasteless and odorless (unlike smoke from a fire), detection and prevention of carbon monoxide poisoning in a home environment is impossible without such a warning device. To make sure that we are covered here in the Rochester and Southeastern Mn area, the state of Minnesota passed a law that requires CO detectors in all dwellings.  And again, that’s every level and within 10 feet of sleeping areas to protect you and your family.

 

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com


Checking The Furnace Filter During Home Inspections

When inspecting a furnace during a home inspection, I typically find that most people do not change their furnace filters at regular intervals.

Replacing your furnaces air filter at regular intervals is the first step in keeping your furnace running properly.  The furnace filter’s main purpose is to keep soot, dust, pollens and other particle contaminants out of the air in your home.  Clogged and dirty air filters result in your furnace blower having to work harder.  This makes your furnace more costly to operate and will shorten its lifespan.

Check your owner’s manual for the proper size and type filter for your furnace.  Furnace filters vary in size, and it is important that you use one that is sized for your furnace.  If you do not have access to the owners manual, you can sometimes find the filter information on the inside panel of the furnace.  If the information is not provided on the furnace, you can try contacting the Rochester or Southeastern MN heating company that supports your furnace brand.  Purchasing your furnace filters by the case changing more convenient.

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com


Rochester MN Home Inspectors Recommend Maintaining Your Furnace
YouTube Preview Image

The attached video is from a home inspection I did recently in an older home where it was obvious that the home owner did a good job of maintaining their heating system. 

There’s not a furnace out there that can, or will continue to operate efficiently without periodic maintenance. It’s important to keep your home’s heating system clean, lubricated, and properly adjusted.  Replacing the filter regularly will extended life of your heating system and will help the furnace to heat efficiently.  In addition, you will save energy and expense.

Ideally, your furnace should be inspected and serviced by a professional heating contractor on a yearly basis.  It’s best to have the system checked before each heating season begins. Your local Rochester, and Southeastern MN  utility and heating companies offer maintenance service at a reasonable price. If you do your own maintenance, you should have your heating system checked by a professional every three to five years.

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com


Rochester MN Home Inspector Recommends Heating System Tune Up

The winter heating season is upon us here in RochesterMN area.  When doing a home inspection and analyzing the heating system, I try to determine is a home’s forced air heating system’s age.   If it is an older unit I suggest you have a professional heating contractor service it every year.  If you furnace is newer, every couple of years should suffice.  This is your best protection against carbon monoxide dangers and heating problems. Routine service will also ensure peak efficiency to save you operating costs.

A good service and inspection costs about $80-$120 and should include a complete cleaning, safety check, and tuning.

The service contractor should:

  • clean the burner and heat exchanger, and inspect for cracks.
  • tune the burners for proper combustion.
  • perform a carbon monoxide test in the heat exchanger.
  • check the vent pipe and draft diverter.
  • inspect the chimney for obstructions and draft.
  • check vent pipes for proper clearance and materials.
  • test fan controls and safety controls.
  • check the thermostat.
  • run the furnace through a complete cycle.
  • check flame roll-out.
  • check gas pressure (if appropriate for your furnace).
  • clean and adjust the pilot light assembly.
  • inspect gas fittings and repair any leaks.
  • lubricate the fan and motor.
  • check belt condition and tension.
  • service the filter.
  • clean the fan and housing if excessive dirt has accumulated.

Replacing parts or cleaning extensively will cost extra.

You should have a basic understanding of how the system works, so if you aren’t clear on what is covered during the home inspection, ask the service contractor to explain the basics. You should routinely service the filter and lubricate the fan and motor a second time during the heating season. You should also inspect the flue connection to the chimney.

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com


Rochester MN Home Inspector Recommends Regular Furnace Filter Maintenence

How often should you change the filter on the furnace?  Whenever it’s dirty.  And although it sounds a little silly, some of better filters get dirty more quickly and need to be changed more often.

A standard cheap (about $1) fiberglass air filter should be checked once a month and changed when it shows visible dirt. You also need to check the filter when running the central air conditioner, because air circulates through the furnace and the filter.

This home inspector recommends you  do a little research befor buying a furnace filter.  You will have to purchace a filter that meets your family needs.   Read the labels-some are more efficient than others. Price will vary from about $3 to $15. These filters will trap much more dirt and smaller particles of dirt. They need to be changed more often because they do a better job of trapping dirt.

The next level up from standard throw-away filters are washable filters and electrostatic washable filters. Washable foam filters work quite well if coated with a special sticky spray like Filter Coat. Electrostatic filters are relatively expensive (about $100), but they do trap dirt well.

A better filter is the 6-inch-thick pleated paper filter. Air is forced through a long accordion of filter paper. Fine holes in the paper trap small particles of dirt. The large surface area limits pressure loss in the heating system. A special frame needs to be installed in the duct work, and the filter costs about $25, but it will last one or two years.

The top of the line is an electronic filter that charges metal plates in the air stream and attracts dust. This is the only type of filter that actually removes smoke particles from the air. This filter costs about $700 installed. Filter plates must be washed monthly in the dishwasher or by hand with soapy water.

I consider the pleated paper filters a good investment. The more expensive electronic filters are great for people with allergies or sensitivity to dust.

Rick Erickson, Home Inspector, HomePro Home Inspections. Rochester MN, Southeastern, MN. 507-202-8942. http://www.homepro-inspection.com



I greatly appreciated your professionalism and your attention to detail during my home inspection.  Buying a home is exciting and expensive, and I tend to overlook things that may be important or a problem.

Debbie H, Pine Island, MN

Rick did a great job inspecting my new condo. He was very friendly and thorough. He did a great job explaining things to me and letting me know what I needed to know. I would  highly recommend him.

Mark K. Rochester, MN

Everything about our home inspection was very professional.  Thank you for all of the helpful hints.  We will tell anyone that needs a home inspector about you.  Thanks!

Amber & Jay L. Mantorville, MN


Call and schedule your inspection today 507.202.8942